logo paquebote
10646 libros encontrados buscando editorial: CRC Press

www.paquebote.com > CRC Press

Orden: · Ver: · Tipo:
ISBN:

978-1-4200-7915-9

Introduction to Composite Materials Design, Second Edition

Editorial: CRC Press   Fecha de publicación:    Páginas: 562
Formato: Hardback 254 x 178 mm
Precio: 99,95
Lo lamentamos, pero este libro no está ya disponible.

Completely revised and updated, this second edition of a bestseller contains new chapters on damage mechanics, fabric reinforced composites, and external strengthening for infrastructure. It covers design aspects such as fiber and matrix selection, fabrication processes, prediction of material properties, and structural analysis and design of beams, plates, and shells, including many fully developed examples. Powerful preliminary design tools, such as "carpet plots," are used in examples throughout the book. Instructional materials (including PowerPoint slides), special software coordinated with the book, and other pedagogical tools are available from a password-protected website maintained by the author.

Composites
Mechanics
Structural Engineering
Textbook
Undergraduate


ISBN:

978-1-4398-1332-4

Concise Chemical Thermodynamics, Third Edition

Editorial: CRC Press   Fecha de publicación:    Páginas: 234
Formato: Paperback 235 x 156 mm
Precio: 49,95
Lo lamentamos, pero este libro no está ya disponible.

Following in the tradition of its predecessors, this third edition continues to offer a practical, example-based exploration of a critical topic, maintaining academic rigor but eschewing complicated calculations. It discusses the world’s current energy consumption and the role of renewable energy in the future, examines exothermic reactions, uses Mathcad ® to calculate a plot of Gibbs energy, explains the Lambda sensor, and employs FactSage software to calculate and describe the production of silicon in an arc (oven) furnace. This latest edition re-works problems that have proven to be the most difficult for students and adds several new ones to further amplify complex areas.

Thermodynamics
Physical Chemistry
Statistical Physics
Textbook


ISBN:

978-1-4200-9495-4

Fermented Foods and Beverages of the World

Editorial: CRC Press   Fecha de publicación:    Páginas: 460
Formato: Hardback 235 x 156 mm
Precio: 159,94
Lo lamentamos, pero este libro no está ya disponible.

This book begins with a concise introduction to one of the oldest biotechnological processes – food fermentation – including its history and global varieties. After covering the various preparation techniques and culinary methods, the book addresses the microbiology-phenotypic and genotypic characterizations, the identifications of function microorganisms, the functional and technological properties, and issues related to food safety. The book also explores the functional properties of fermentation, how it improves product shelf life, ensures food safety, enriches nutritional supplements, and increases the probiotic functions in some foods. The rising popularity of probiotic and prebiotic foods and the health benefits they are known for are also discussed.

Food Laws & Regulations
Brewing
Nutraceuticals & Functional Foods
Reference
Professional


ISBN:

978-1-4200-7329-4

Enterprise Systems Engineering 'Advances in the Theory and Practice'

Editorial: CRC Press   Fecha de publicación:    Páginas: 477
Formato: Hardback 235 x 156 mm
Precio: 89,95
Lo lamentamos, pero este libro no está ya disponible.

With coverage ranging from the complex characteristics and behaviors of enterprises to the challenges they pose for engineering and technology, this book examines the impacts of enterprise processes and leading-edge technologies on the evolution of an enterprise. It discusses new and emerging modes of thought that are increasingly being recognized as essential to successful systems engineering, defining and examining key building blocks of this evolving field. It addresses the issues of the changing nature of SE, lays out a recommended direction for the future, and provides a unified basis for moving toward a mature discipline with the expanded scope.
• Complex and Enterprise Systems Engineering
Systems & Control Engineering
Engineering Management
Manufacturing Engineering
Reference
Professional


ISBN:

978-1-4200-6500-8

Nanoscience 'Colloidal and Interfacial Aspects'

Editorial: CRC Press   Fecha de publicación:    Páginas: 1256
Formato: Hardback 254 x 178 mm
Precio: 299,95
Lo lamentamos, pero este libro no está ya disponible.

Bringing together a prominent roster of 42 leading investigators and their teams, this volume details the wide range of theoretical and experimental knowledge that can be successfully applied for investigating nanosystems. The book provides researchers with a full examination of nano-disperse colloids, homogeneous and heterogeneous nano-structured materials (and their properties), and shelf-organization at the nano-scale. It explores non-linear lectrokinetic phenomena in nano-sized dispersions and nano-sized biological systems. It discusses application aspects of technological processes in great detail, offering scientists and engineers across all fields authoritative commentary on colloid and interface science operating at the nanoscale.
• Surfactant Science
Physical Chemistry
Nanoscience & Nanotechnology
Materials Chemistry
Reference
Professional


ISBN:

978-1-4200-9082-6

Process Modeling in Composites Manufacturing, Second Edition

Editorial: CRC Press   Fecha de publicación:    Páginas: 630
Formato: Hardback 254 x 178 mm
Precio: 149,94
Lo lamentamos, pero este libro no está ya disponible.

An introduction to modeling of composite manufacturing processes, this book covers the basic principles of fluid mechanics and heat transfer. The book includes example problems solved to facilitate the use of back-of-the-envelope calculations, introducing a scientific basis to manufacturing. The end of each chapter has questions and problems that reinforce the content and fill in the blanks sections that will develop the experience base of the manufacturing, materials, and design engineer or scientist. In this new edition, the computer based solutions were obtained using MATLAB code and also flow simulation based analysis.

Composites
Industrial Engineering & Manufacturing
Aerospace Engineering
Reference
Undergraduate


ISBN:

978-0-8493-9279-5

Quenching Theory and Technology, Second Edition

Editorial: CRC Press   Fecha de publicación:    Páginas: 725
Formato: Hardback 254 x 178 mm
Precio: 189,95
Lo lamentamos, pero este libro no está ya disponible.

An essential revision of the original published nearly 20 years ago, this new edition, created with the urging of International Federation for Heat Treatment and Surface Engineering (IFHTSE), is the only complete reference on the critical topic of quenching, which is fundamental to the production of defect and distortion-free products. Leading international experts have contributed the most authoritative, exhaustive, and recent findings on quenching to this second edition. Topics include thermo-and fluid dynamic principles of heat transfer during cooling, wetting kinematics, and residual stresses after cooling, as well as computer modeling and prediction of microstructure transformation, hardness distribution, stress-strain, and distortion. Ideal for specialists in heat treatment practice, this book is also useful for higher education and numerous specialized courses and seminars worldwide.

Thermodynamics
Materials Science
Metals & Alloys
Reference
Professional


ISBN:

978-1-4398-4169-3

Catastrophic Disaster Planning and Response

Editorial: CRC Press   Fecha de publicación:    Páginas: 401
Formato: Hardback 235 x 156 mm
Precio: 79,95
Lo lamentamos, pero este libro no está ya disponible.

Written by a recognized expert in emergency management, this volume is a thorough study of the planning process and response procedures for catastrophic disasters. Topics addressed include an introduction to catastrophe planning and response; ethical, political, and legal issues; logistics; critical infrastructure; public health and mass evacuation planning strategies and skills; and planning for response, recovery, and reconstruction. Recent real-world case studies are used to demonstrate the characteristics of a catastrophic disaster, the special issues of response and recovery, and preparation on international, national, and local levels.

Security Services
Critical Security
Reference


ISBN:

978-1-4398-3522-7

Reliable Control and Filtering of Linear Systems with Adaptive Mechanisms

Editorial: CRC Press   Fecha de publicación:    Páginas: 264
Formato: Hardback 235 x 156 mm
Precio: 119,95
Lo lamentamos, pero este libro no está ya disponible.

This book reports on a new method of fault tolerant control based on the authors’ research findings. The authors develop a theoretical framework for reliable control in linear systems with adaptive mechanisms. They also present guidelines for designing control systems with guaranteed stability and desired performance in the presence of actuator/sensor failures. The book contains valuable reference materials for researchers in reliable control as well as practicing engineers. It provides industrial case studies, including flight tracking control systems design for F-16 fighter jets and also redundant sensors for motors.

Networks
Aerospace Engineering
Digital Signal Processing
Reference


ISBN:

978-1-4398-2718-5

Implementing the Project Management Balanced Scorecard

Editorial: CRC Press   Fecha de publicación:    Páginas: 447
Formato: Hardback 235 x 156 mm
Precio: 79,95
Lo lamentamos, pero este libro no está ya disponible.

Business managers have long known the power of the Balanced Scorecard in executing corporate strategy. This volume shows project managers how they too can use this framework to meet strategic objectives. It supplies valuable insight into the project management process as a whole as well as detailed explanations on how to implement the balanced scorecard to measure and manage performance and projects. It investigates numerous sample scorecards, metrics, and techniques and includes a plethora of resources in its appendices and on the accompanying CD, including instructions for developing a measurement program, a full metrics guide, a sample project plan, and a set of project management fill-in forms.

Management of IT
Software Engineering & Systems Development
Engineering Project Management
Reference




Si no ha encontrado el libro que busca, pinche en nuestro servicio de Pedido Directo y pídanoslo.

Volver a Página Principal

Otras novedades


© Paquebote 1998-2021 Todas las secciones | Ayuda | Aviso Legal